The following article is Open access

Design of the analog front-end for the Timepix3 and Smallpix hybrid pixel detectors in 130 nm CMOS technology

, , , , , , , , , and

Published 21 January 2014 © CERN 2014
, , Citation M De Gaspari et al 2014 JINST 9 C01037 DOI 10.1088/1748-0221/9/01/C01037

1748-0221/9/01/C01037

Abstract

This paper describes a front-end for hybrid pixel readout chips, which was developed for the Timepix3 and Smallpix ASICs. The front-end contains a single-ended preamplifier with a structure for leakage current compensation which can handle both signal polarities, and a single-threshold discriminator with compensation for pixel-to-pixel mismatch. Preamplifier and discriminator are required to be fast, to allow a Time-Of-Arrival (TOA) measurement with a resolution of 1.56 ns. Time-Over-Threshold (TOT) is also measured; the monotonicity of TOT with respect to the input charge is greatly improved as compared to the previous Timepix chip. The analog area is only 55 μm × 13.5 μm. Timepix3 has already been fabricated and the first test results are also presented in this paper.

Export citation and abstract BibTeX RIS

published under the terms of the Creative Commons Attribution 3.0 License by IOP Publishing Ltd and Sissa Medialab srl. Any further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation and DOI.

Please wait… references are loading.
10.1088/1748-0221/9/01/C01037